AVK METAL SEATED MULTI DOOR RECOIL CHECK VALVE
SS hinge pin, gunmetal seat, without bypass, DN 600-1600, PN 16
Contact
AVK Saudi Valves
Jeddah Industrial City, Phase 4, Street no 45 P.O. Box 10830, 21443 Jeddah 24/7 Leakage Repair Service +966 50 595 5166
Multi door recoil check valve without bypass for drinking water, waste water and neutral liquids to max. 70° C
The recoil check valve is a high performance, fast acting, non-slam check valve used to prevent flow reversal. Mechanical assistance is given by a combination of inertia reduction, concentration of mass and ideal suspension of the moving elements. Hydraulic assistance is given by the novel provision for forward and backward water streams within the body and around the valve door.
| Variant 641/21-002 | |
|---|---|
| Connection: | Flanged |
| Material: | Ductile iron |
| PN: | PN 16 |
Features
- Fast acting closure response, it incorporates every mechanical and hydraulic assistance to aid quick valve closure
- Low reverse velocity characteristics
- Used on multi-pump systems and also single pump systems with high system deceleration gradients
- Inclined seating angle to reduce disc travel
- Integrally weight loaded door to accelerate movement
- No additional devices required to effect valve closure, it is practically maintenance free
- High reliability, it is designed based on extensive in-house laboratory research and proved by over 50 years of experience around the world
- Body, stopper, cover and door of ductile iron with two pack epoxy dark blue externally and light blue internally according to WRAS
Downloads
Installation, Operation & Maintenance
Datasheet
Tender Text
Outline drawings DWG
Outline drawings DXF
Outline drawings IGS
Outline drawings STEP
Components
| 1. | Eye bolt | Stainless steel |
| 2. | Inlet body | Ductile iron GJS-500-7 (GGG-50) |
| 3. | Stud bolt | Steel, hot dip galvanized |
| 4. | Nut | Steel, hot dip galvanized |
| 5. | O-ring | EPDM rubber |
| 6. | Outlet body | Ductile iron GJS-500-7 (GGG-50) |
| 7. | Washer | Steel, hot dip galvanized |
| 8. | Washer | Steel, hot dip galvanized |
| 9. | Blind plate for proxy switch | Stainless steel |
| 10. | O-ring | EPDM rubber |
| 11. | Rivet pin | Bronze PB102 |
| 12. | Stud bolt | Steel, hot dip galvanized |
| 13. | Seat ring | Bronze CC491K |
| 14. | Top door | Ductile iron GJS-500-7 (GGG-50) |
| 15. | Top stopper | Ductile iron GJS-500-7 (GGG-50) |
| 16. | O-ring | EPDM rubber |
| 17. | Face ring | Bronze CC491K |
| 18. | Bottom door | Ductile iron GJS-500-7 (GGG-50) |
| 19. | Bottom stopper | Ductile iron GJS-500-7 (GGG-50) |
| 20. | Washer | Steel, hot dip galvanized |
| 21. | Stud bolt | Steel, hot dip galvanized |
| 22. | Nut | Steel, hot dip galvanized |
| 23. | Blind plate for proxy switch | Ductile iron GJS-500-7 (GGG-50) |
| 24. | Bolt | Steel, hot dip galvanized |
| 25. | O-ring | EPDM rubber |
| 26. | Hinge pin | Stainless steel 1.4401 |
| 27. | Bush | Composite |
| 28. | Split pin | Stainless steel 1.4401 |
| 29. | Hinge pin collar | Stainless steel 1.4401 |
Test/Approvals
- Seat: 1.1 x PN. Body: 1.5 x PN.
Standards
- Designed according to manufacturer's standard
- Flange drilling to EN1092-2 (ISO 7005-2), PN10/16